Can’t Go With The Flow? Try These Solid Plumbing Tips

Did you know that you can use the same antifreeze that you use in your car to help prevent your home plumbing from freezing? To find out how and why, as well as other great tips for how to maintain your home plumbing, read the following article right away.

Check the filters in your furnace, regularly. If these filters have not been cleaned or replaced recently, they may become clogged. This will affect how well your furnace is able to work, meaning that you may not have enough heat during the winter. Take this simple step, as soon as the weather starts to become cold.

If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.

Make sure everyone that lives in your house knows where to find and use the main water shut off valve in case there is a burst pipe emergency. This is especially important if you live in an area where your pipes may freeze. Take a moment to show your family members where the valve is and how to properly shut it off.

One of the things that you can do to maximize the security of your home is to seal all of the cracks in your outdoor faucets. Even a tiny crack can intensify as the season progresses and lead to serious problems down the road. Reduce drips and leaks for optimal protection.

Sometimes you have to make the choice between replacing or repairing. If you have an old appliance, that uses a lot of water or electricity, it may be best to replace. Sure, it will cost more initially, but it will save you money in the long run. The other thing is, you can’t be sure how well a repair will work out, whereas with a new appliance you’ll at least get a guarantee.

To avoid freezing pipes in the winter, make sure to insulate any exposed pipes in you basement before winter comes. Pay extra attention to pipes near the outside walls. If you have had a problem with any particular pipe freezing in the past, apply some heat tape to insulate those pipes.

If you have to take out a clean-out plug but you aren’t having any success, two ways can assist you in doing this. The first method you can try is using a chisel with a hammer to get the fitting loose. Another option is chiseling through the relevant clean out plug.

In conclusion, you want to be sure that all of the advice you have heard about plumbing is correct. Take the time to go back over this article and decide what applies to you and what you need to learn even more about. The learning process never stops and it will benefit you greatly.…